Materials catalog

Engineering 3D printing filaments for Epitum printers

21 filaments and printing aids — from everyday ABS to carbon-fiber PPS — stocked by MG World Tech for the Epitum JL and Epitum L, with US prices per spool and a print guide for every material.

Printing engineering materials

Why Epitum handles engineering filaments

Engineering filaments fail on hobby machines for three reasons: the hot end is too cold, the part cools unevenly, or there is no way to support complex geometry. Epitum printers address all three.

430 °C nozzle

Enough headroom for PPS, PEEK, PEKK and PPSU — not just the 300 °C class of engineering plastics.

Heated chamber up to 90 °C

Active chamber heating keeps large parts warm, improving layer bonding and reducing warping.

JetSmart™ dual extrusion

On the Epitum JL, a second nozzle prints soluble VXL supports next to the model material.

Profiles in Printoformer

Ready-made material profiles are the starting point — fine-tune them for your part and nozzle.

Composite-ready nozzles as standard

Carbon and glass fibers are abrasive and wear a brass nozzle quickly. Epitum printers ship with wear-resistant nozzles, so PPS CF 15, PA12 CF 15, PA 25 CF, PP CF 18, ABS CF and PC PBT GF print on the same hot end and nozzle as PLA, ABS or PEEK — no swap between materials. Follow the minimum nozzle diameter in each datasheet.

Dry before you print

Most engineering polymers absorb moisture from the air, which shows up as bubbles, stringing and weak layers. Keep spools sealed with desiccant and dry them to the datasheet schedule before long jobs.

Choose by requirement

You needStart with
Heat & chemical resistancePPS CF 15 — carbon-fiber PPS
Stiff, light, low moisture uptakePA12 CF 15 — nylon 12 with 15% carbon fiber
Glass-fiber stiffnessPC PBT GF — glass-fiber PC/PBT alloy
Flame retardancyPC ABS V0 — halogen-free UL94 V0 PC/ABS
Food contactABS FOOD — EC 1935/2004 and EU 10/2011
Metal replacementPA 25 CF — PA with 25% carbon fiber
Medical & lab partsABS MED — USP Class VI
Electronics handlingABS ESD — anti-static
Outdoor UV exposureASA UV729 — UV-stable ASA
Soluble supports for PA, PC, PPSVXL111 — Epitum JL dual extrusion
Material guides

How to print each material

Generic guides to each material type — typical property ranges and starting print settings compiled from several manufacturers’ published datasheets, plus which Epitum to use and why. The range runs from casting wax and PMMA to PEEK, PEKK and PEI — the last three we help customers plan on request.

Investment casting: from wax up

Everyday engineering plastics

Compliance & special-purpose grades

Fiber-reinforced composites

High-performance polymers (PAEK, PEI)

Soluble supports

Basic

Basic filaments

Everyday plastics — prototyping, visual models, low-stress functional parts.

Basic plastic filament spools for Epitum 3D printers
Prototyping, visual models and low-stress functional parts.
Engineering

Engineering filaments

Functional end-use parts — medical, food-contact, electronics, flame-retardant.

Engineering filaments — medical, food-safe, ESD
Medical, food-contact, electronics and flame-retardant parts.
Composites

Composite filaments

Reinforced filaments — strength-to-weight critical parts, metal replacement. Carbon and glass fiber are abrasive — Epitum ships with wear-resistant nozzles, so they print without a nozzle swap.

Carbon-fiber composite filament spools and printed part
Strength-to-weight critical parts and metal replacement.
Support & Specialty

Soluble supports & printing aids

Soluble supports and printing aids for complex geometries and clean first layers. Soluble supports need a second nozzle — print them on the dual-extrusion Epitum JL.

Soluble support filament and 3D printing adhesives
Soluble supports and first-layer aids.

Magigoo Original

First-layer adhesive for ABS, PLA, PETG, HIPS, ASA, TPU.

$21.9550 ml bottle
Adhesion tips →

Need a material that is not listed?

Our catalog has 30+ engineering filaments. Tell us the part and the requirement — we will recommend a material and send a quote.

Ask an engineer