Professional 3D Printers

Epitum. Fastest way to your idea.

Professional 3D printers engineered to simplify uninterrupted production — built for engineering composites, repeatable results, and lights-out manufacturing.

Explore the printers Find out why we're better

430 °Cextruder

500 mm/sprint speed

610 mmbuild height

Chosen by professionals

Trusted by manufacturers, service bureaus and industry leaders.

>0 3D printing services

>0 Manufacturers, market leaders

>0 Professionals in various fields

0 Devices in production worldwide

Engineered for production

Three pillars that make Epitum different

Extreme simplicity

Designed to minimise operator error. Fast start, saved presets and ready-made material profiles get you printing within minutes.

Intuitive touch interface
Saved settings for every mode
Profiles for every material

Engineering capabilities

Built on a “composites native” principle. Active chamber heating ensures proper curing of layers and surface fidelity.

Wide range of engineering plastics
Composites with CF / GF reinforcement
Large-scale parts up to 360×360×610 mm

Result, time after time

Predictable repeatability and rugged hardware for long, uninterrupted production runs — even on parts with demanding tolerances.

Repeatable to < 1 µm
Automated diagnostics & alerts
Ready for industrial environments

Complete ecosystem

Everything you need for efficient production

We don’t just ship a printer. Epitum is a complete production system — hardware, materials, software and support — engineered to work together.

3D PrintersEpitum JL · Epitum L

Materials30+ engineering filaments

SoftwarePrintoformer slicer

SupportPersonal manager

Patented technology

JetSmart™ — switch materials in < 0.5 s

A unique nozzle-switching system for J-series printers. Two movable nozzles, one filament motor, and a blocking valve that eliminates plastic stains — no more wipe towers.

Close-up of the Epitum JetSmart dual-extruder print head — JetSmart™ print head with dual nozzles, blocking valve and HotSwap feed.

< 0.5s

Switching time between nozzles

< 1µm

Repeatability on nozzle alignment

0towers

Wipe towers required — none.

Special valve for clean printing

An inactive nozzle is sealed by a mechanical valve while the other prints, so dripping plastic never touches your part.

Save money with JetSmart™

15 hours saved on a single 300 mm part

Example: 300 mm tall model · 0.1 mm layer height · dual-material print

32h total print time with JetSmart™

↓ −15 h faster than conventional dual extruder

Active printing Continuous extrusion · 28.8 h

28.8 h

Nozzle switching 5 s per switch · 2,300 switches

3.2 h

Epitum JL in a calm studio environment with bamboo and ceramic vases

JL · J-series

Flagship

Epitum JL

Your personal 3D printing studio.

$8,999 MSRP · ships from US warehouse

An ideal combination of dual extrusion and large-scale 3D printing — capable of better results by regulating chamber temperature and inspecting surface quality with onboard sensors. The best solution for high-volume manufacturing.

Patented JetSmart™ nozzle switching technology
High-temperature printing up to 430 °C
Automatic control systems with onboard diagnostics
Print heights up to 610 mm on a 360 × 360 build plate
Hot Swap System for uninterrupted spool changes

360×360×610build, mm

430 °Cextruder

500 mm/sspeed

10 µmmin layer

Request Epitum JL quote

Epitum L on a production-grade pedestal with bold accent backdrop

L · Industrial

Single-extruder workhorse

Epitum L

When you need more.

$7,299 MSRP · ships from US warehouse

Designed to maintain quality and fidelity at large sizes. Epitum L produces components for sizable objects and assemblies, while its control systems guarantee precision and manage large filament volumes effectively.

Full autocalibration of the build plate — zero user intervention
High-temperature printing up to 430 °C
3D printing with composites — CF, GF, PEEK, PEKK, PPSU
Print heights up to 610 mm on a 360 × 360 build plate
Ready for industrial 24/7 environments

360×360×610build, mm

430 °Cextruder

130 cm³/hthroughput

75 kgweight

Request Epitum L quote

Inside every Epitum

Engineered for uninterrupted production

Active chamber heating

Heated build chamber for stronger parts with better layer curing.

Hot Swap system

Uninterrupted printing when one filament spool runs out — auto-switch to the next.

Auto nozzle alignment

Fully automated calibration for accurate dual-material prints, every time.

Speed mode presets

Intelligent speed modes save preparation time on typical printing tasks.

Higher print speed

Up to 500 mm/s with 130 cm³/h throughput on a 0.5 mm nozzle.

Filament feed control

End-of-filament sensor and flow monitoring prevent failed prints.

First-layer print control

Visual inspection of the first layer to guarantee a strong foundation.

Surface quality control

Onboard sensors detect anomalies and pause before defects compound.

Great choice for

Where Epitum delivers

Hand holding a custom 3D printed end-use part next to a laptop

Low-volume manufacturing

Print custom end-use parts and small runs without tooling. Short payback period, repeatable results, ready for the next iteration the same day.

Industrial production

Built for 24/7 operation. Run a print farm of Epitum machines side-by-side with automated monitoring and queueing across different jobs.

Complex 3D printed lattice geometry showcasing material capability

3D printing services

Wide material compatibility and a large build volume let service bureaus take on jobs of any geometry — from lattices to large end-use parts.

Materials

Print with any filament — up to 430 °C

Basic plastics, engineering thermoplastics, high-temperature polymers and composite filaments — Epitum supports them all.

Basic plastic filament spools for Epitum 3D printers — Everyday plastics — prototyping, visual models, low-stress functional parts.

ABS Performance

High-quality engineering ABS, 1 kg spool.

$46.63

ABS FF

Fast-forward ABS for high-speed printing, 1 kg.

$49.79

ASA UV729

UV-stable ASA for outdoor applications, 1 kg.

$63.98

Engineering polycarbonate, 0.75 kg.

$67.53

PP4

Engineering polypropylene, 0.75 kg.

$66.04

HIPS

High-impact polystyrene filament, 1 kg.

$50.19

Engineering filaments — medical, food-safe, ESD — Functional end-use parts — medical, food-contact, electronics, flame-retardant.

ABS FOOD

Food-safe ABS, EC 1935/2004 certified, 1 kg.

$67.53

ABS MED

USP Class VI medical-grade ABS, 1 kg.

$67.53

ABS ESD

Anti-static, electronics components, 0.75 kg.

$113.06

PC ABS V0

Halogen-free UL94 V0 flame retardant, 1 kg.

$68.71

Healthfil FORTIS

Polyolefin, skin-contact certified, 0.75 kg.

$93.54

Carbon-fibre composite filament spools and printed part — Reinforced filaments — strength-to-weight critical parts, metal replacement.

ABS CF

ABS with 15% carbon fiber, 0.75 kg.

$74.92

PP CF 18

Polypropylene with 18% carbon fiber, 0.70 kg.

$80.80

PA12 CF 15

Nylon 12 with 15% carbon fiber, 0.75 kg.

$113.95

PA 25 CF

Metal replacement, PA with 25% carbon fiber, 0.75 kg.

$152.98

PC PBT GF

PBT glass-fiber reinforced polycarbonate, 0.75 kg.

$68.31

PPS CF 15

PPS engineering grade with 15% carbon fiber, 0.75 kg.

$159.19

Soluble support filament and 3D printing adhesives — Soluble supports and printing aids for complex geometries and clean first layers.

VXL90

Soluble support — PLA, PETG, ABS, ASA, TPU. 0.5 kg.

$181.50

VXL111

Soluble support — ABS, ASA, HIPS, PA, PC, PPS. 0.75 kg.

$247.50

VXL EX 1000g

Eco-friendly support removal agent, 1 kg.

$73.15

Magigoo Original

First-layer adhesive — ABS, PLA, PETG, HIPS, ASA, TPU. 50 ml.

$21.95

Software

Printoformer — simplified 3D printing

User-friendly for beginners, deep enough for seasoned engineers. Printoformer prepares your model in a couple of clicks, with advanced controls one panel away.